What should I do if my vape tastes burnt

If your vape tastes burnt, replace the coil, ensure proper e-liquid levels, and adjust wattage settings to match your device’s specifications.

Understanding Why Your Vape Tastes Burnt

Experiencing a burnt taste while vaping disrupts the enjoyment and raises concerns about the device’s performance. This section delves into the primary reasons such as coil burnout, dry hits, insufficient e-liquid, and high wattage settings, offering insights into prevention and resolution.

Coil Burnout

A primary culprit behind a burnt vape taste is coil burnout. The coil serves as the heart of the vaping device, vaporizing the e-liquid for inhalation. Over time, the coil accumulates residue or suffers from wear and tear. This degradation compromises the wicking material’s ability to absorb e-liquid, leading to overheating and a burnt taste. On average, a coil’s lifespan ranges from one to two weeks, although this duration can vary based on factors like usage frequency, e-liquid sugar content, and device power settings. Regular coil replacement and ensuring the coil remains well-saturated with e-liquid are key strategies to combat coil burnout.

Dry Hits

Another common issue is the occurrence of dry hits, which happen when the coil’s wick is not fully saturated with e-liquid. This results in the heating of a dry wick, producing a harsh and burnt taste. Dry hits not only ruin the vaping experience but can also diminish the coil and wicking material’s longevity. To avoid dry hits, it’s crucial to ensure the wick is fully saturated, especially after refilling the tank, and to avoid vaping with a low e-liquid level. Monitoring vaping frequency helps maintain wick saturation.

What should I do if my vape tastes burnt

Insufficient E-Liquid

Vaping with low e-liquid levels often leads to a burnt taste. If the e-liquid level drops below the intake holes on the coil, the device ends up drawing in air instead of e-liquid, causing the coil to overheat. Keeping the tank at least one-quarter full is essential to prevent this issue, ensuring consistent wick saturation and a flavorful vaping experience. This practice not only enhances the vaping experience but also extends the lifespan of vaping components.

High Wattage Settings

High wattage settings pose a significant risk of causing a burnt taste. Elevated power levels heat the coil more quickly than usual, which can lead to the burning of the e-liquid or the wicking material if it lacks proper saturation. Adhering to the recommended wattage range is critical to avoid overheating. Vaping devices and coils typically come with suggested wattage or temperature settings based on the coil’s resistance and the type of wicking material. Respecting these recommendations ensures optimal flavor and coil longevity, as higher wattage demands thicker wicking materials and larger e-liquid intake holes to prevent burning.

In essence, addressing the common causes of a burnt taste when vaping significantly improves the experience. Through diligent maintenance such as timely coil replacement, maintaining proper e-liquid levels, and adhering to recommended wattage settings, vapers can enjoy a consistent, flavorful experience free from the unpleasantness of a burnt taste.

Immediate Solutions to Fix a Burnt Taste

When you encounter a burnt taste while vaping, it can be a jarring experience that detracts from the enjoyment and satisfaction of vaping. Fortunately, there are immediate solutions you can implement to rectify this issue, ranging from replacing the coil to adjusting your device’s settings. Here’s a detailed look at these solutions, enriched with specific details and guidance to enhance your vaping experience.

Replacing the Coil

A burnt coil is often the primary reason behind the unpleasant taste, and replacing it is a straightforward solution. Coils have a finite lifespan, typically lasting between 1 to 2 weeks, depending on your vaping habits and the sweetness of your e-liquid. To replace the coil:

  • Disassemble your vape device to access the coil.
  • Unscrew the old coil from its housing.
  • Screw in a new coil, ensuring it’s firmly in place.
  • Prime the new coil (covered in the next section) to prevent dry hits.

Ensuring you have spare coils on hand means you won’t have to endure a burnt taste for long. Regularly changing the coil not only eliminates the burnt taste but also maintains the quality of your vaping experience.

Priming the Coil Properly

Priming the coil is crucial for preventing burnt hits and extending the coil’s lifespan. This process involves manually soaking the wick with e-liquid before the first use, allowing for proper saturation. To prime a coil:

  • Apply e-liquid directly to the wick on the coil’s side holes.
  • Add a few drops of e-liquid to the top of the coil to ensure the wick is thoroughly saturated.
  • Assemble the tank and fill it with e-liquid.
  • Let the device sit for about 10 minutes, allowing the e-liquid to fully saturate the wick.

Proper priming ensures that the coil is ready to vaporize e-liquid efficiently, reducing the risk of burning the wick.

Refilling or Topping Off E-Liquid

Low e-liquid levels can lead to dry hits and a burnt taste. Keeping your tank adequately filled ensures that the coil is continuously saturated. It’s advisable to refill your tank before it’s completely empty, preferably keeping the liquid level above one-quarter of the tank’s capacity. This practice not only prevents dry hits but also contributes to optimal vapor production and flavor quality.

Adjusting Wattage and Temperature Settings

High wattage and temperature settings can cause the e-liquid to vaporize too quickly, burning the wick and creating a burnt taste. Adjusting these settings to match the coil’s recommended range can significantly improve your vaping experience. Most coils indicate the optimal wattage range on their side, guiding you to find the right setting. Starting at the lower end of this range and gradually increasing the power allows you to find the sweet spot for flavor and vapor production without risking a burnt taste.

  • For coils rated for high wattage, ensure your device doesn’t exceed the upper limit.
  • For temperature-controlled devices, setting the temperature within the coil’s tolerance prevents overheating.

Implementing these solutions not only addresses the immediate issue of a burnt taste but also enhances the longevity of your vaping device and the quality of your vaping sessions. Regular maintenance, coupled with a mindful approach to device settings, ensures a consistently enjoyable vaping experience.


Preventive Measures to Avoid Burnt Taste

Adopting preventive measures is key to avoiding the unpleasant experience of a burnt taste when vaping. By focusing on regular maintenance and understanding your device’s needs, you can ensure a consistently enjoyable vaping experience. Here are detailed strategies to prevent your vape from producing a burnt taste.

Regular Coil Replacement

Coils are the heart of your vaping device, responsible for heating the e-liquid and turning it into vapor. Over time, coils can accumulate residue from the e-liquid or simply wear out, leading to a burnt taste. Experts recommend replacing your coil every 1 to 2 weeks, although this frequency can vary based on your vaping habits and the type of e-liquid you use. Darker e-liquids or those with a higher sugar content tend to shorten coil life due to quicker buildup.

To ensure you’re not caught off guard, keep track of your vaping frequency and the types of e-liquids you use. Adjust your coil replacement schedule accordingly. Having spare coils at your disposal means you can replace them as soon as you notice any decline in flavor quality or vapor production, effectively preventing burnt tastes.

Proper E-Liquid Levels Maintenance

Maintaining proper e-liquid levels in your tank is crucial for preventing dry hits, which can lead to a burnt taste. Ensure your tank is never too low; aim to refill when it reaches about one-quarter full. This practice keeps the wick saturated, allowing it to deliver a smooth and flavorful vapor.

Neglecting to refill your tank can cause the wick to dry out, especially if you’re vaping at high wattages, which consumes e-liquid more rapidly. Regularly checking and maintaining e-liquid levels not only prevents the unpleasant taste of burnt hits but also prolongs the life of your coil.

Correct Wattage and Temperature Control

Using the correct wattage and temperature settings for your device is essential for avoiding burnt hits. Each coil is designed to operate within a specific wattage range, which is usually indicated on the coil itself or in the user manual. Starting at the lower end of this range and gradually increasing the power allows you to find the optimal setting without overstressing the coil.

For devices with temperature control, setting the temperature within the recommended limits for your coil material (such as nickel, titanium, or stainless steel) helps prevent overheating. Overheating can degrade the coil and wick, leading to a burnt taste. By understanding and utilizing these controls, you can ensure a balanced and enjoyable vaping experience.

Understanding Your Vape Limitations

Every vaping device has its own set of limitations, including maximum wattage, coil resistance, and e-liquid compatibility. Familiarizing yourself with these limitations can prevent you from pushing your device beyond its capabilities, which can lead to burnt tastes or even damage to the device.

For instance, using a high-VG e-liquid in a device not designed for it can lead to wicking issues, as these thicker e-liquids require more time to saturate the coil. Similarly, exceeding the recommended wattage can quickly burn out coils, especially in high-powered devices. Taking the time to understand your device’s specifications and how they match your vaping preferences is crucial for maintaining its performance and your satisfaction.

Incorporating these preventive measures into your vaping routine not only enhances the quality of your experience but also extends the lifespan of your device. Regular maintenance, along with a mindful approach to device settings and e-liquid choices, lays the foundation for a consistently pleasant vaping journey.

What should I do if my vape tastes burnt

Troubleshooting Persistent Issues

When troubleshooting persistent issues with your vape, it’s important to delve deep into the potential causes and solutions. By identifying and addressing these concerns, you can enhance your vaping experience and avoid common pitfalls. Here’s a comprehensive look at strategies to troubleshoot and resolve frequent issues.

Identifying Incompatible E-Liquids

Incompatible e-liquids can cause various problems, from clogged coils to unsatisfactory vapor production. High-VG e-liquids, while popular for producing thick clouds, may not wick well in certain devices, especially those with small wicking ports. This mismatch can lead to dry hits and a burnt taste. Conversely, high-PG e-liquids might leak in devices designed for thicker liquids, leading to a messy and frustrating experience.

To avoid these issues, consult your device’s manual for recommended e-liquid ratios. Most manufacturers specify the ideal VG/PG ratio to match their device’s design. If you’re experimenting with new flavors or brands, start with a small quantity to assess compatibility. Observing how your device performs with different e-liquids enables you to identify the perfect match for both satisfaction and device longevity.

Cleaning and Maintenance Tips

Regular cleaning and maintenance are pivotal for the optimal performance of your vape. Residue from e-liquids can build up over time, affecting flavor and functionality. Dismantle your device according to the manufacturer’s instructions and clean each component with isopropyl alcohol or warm water, ensuring they are completely dry before reassembly. Pay special attention to the tank and coil, as these are often the culprits for flavor issues.

For coils that cannot be cleaned, replacing them regularly is essential. Keep connections clean to ensure efficient power transfer from the battery to the coil. A periodic deep clean, coupled with daily quick cleans, can significantly extend the life of your device and improve your vaping experience.

When to Seek Professional Help

If you’ve tried troubleshooting your device without success, it might be time to seek professional help. Persistent issues like leaking, gurgling, or burnt tastes, despite thorough cleaning and proper use, could indicate a more serious problem. Vape shops offer expert advice and can often diagnose issues that aren’t apparent to the average user.

Professionals can also provide insights into whether a repair is cost-effective or if it’s time to consider upgrading your equipment. They can help you understand the nuances of your device, offering solutions that you might not find in the manual or online forums.

Upgrading Your Vape Equipment

Sometimes, persistent issues signal that it’s time to upgrade your vape equipment. Advances in vaping technology mean newer devices offer improved performance, better flavor, and more customization options. If your device is several years old or no longer meets your needs, investing in a newer model can transform your vaping experience.

Before purchasing, research the latest models and consider what features are most important to you. Battery life, tank capacity, coil options, and adjustability are key factors. Upgrading offers an opportunity to address the limitations of your current setup, whether that’s insufficient vapor production, flavor fidelity, or the need for more precise control over your vaping experience.

Incorporating these troubleshooting and preventive measures ensures not only a smoother vaping journey but also a more enjoyable and satisfying experience overall. By understanding the complexities of your device and the e-liquids you use, you can avoid common pitfalls and maintain your device in top condition for years to come.

Why does my vape taste burnt even with a new coil?

A burnt taste with a new coil often occurs due to insufficient priming. Before using a new coil, apply e-liquid directly to the wick and wait 5-10 minutes to ensure full saturation. This prevents dry hits and extends coil life.

How often should I change my vape coil?

Change your vape coil every 1 to 2 weeks, depending on your usage frequency and the type of e-liquid. Darker or sweeter e-liquids may require more frequent changes due to faster buildup and residue.

What is the best way to clean my vape tank?

Disassemble your tank and rinse each part with warm water. For thorough cleaning, use a small amount of non-flavored vodka on a cloth to wipe down parts, then rinse with water and dry completely before reassembly.  

Can I use any e-liquid in my device?

Not all e-liquids are compatible with every device. High-VG liquids are best for sub-ohm devices, while higher PG liquids suit smaller, lower-power devices. Using the incorrect type can lead to wicking issues and burnt tastes.
Scroll to Top